Direct Replacement Seals For Food, Beverage And Dairy Industries
Welcome to Vulcan's Unique Seal Identification (ID) Suite providing you, the user, a view of our complete range of seals, with the capability to identify seals and their characteristics as well as conversions from our competitor product codes.
Direct Replacement Seals For Food, Beverage And Dairy Industries
 |
 |
30mm Outboard encased rotary, with carbon face and garter spring. |
 |
 |
Vulcan can now offer replacement seals for the common models of Waukesha® Universal-series pumps. These seals comprise complete seals with rotary and inner and outer static faces, O-Rings and wave-springs as required. The Vulcan Type 87 is designed for the Universal I®-series of pumps, Type 88 is designed for Universal II®-series of pumps. Rotary with inner face is Type 87 or 88. Rotary with inner and outer statics is Type 87A or 88A, The profile of the reverse of the rotary face can be flat or sloped depending on shaft size.
|
 |
 |
Outboard Rotary (no base plate) with inserted carbon face. These do not have a base plate and have left hand springs. |
 |
 |
Inboard Rotary, with base plate, with inserted carbon face. Where XX is stated in the code, apply 22,30 or 35 as appropriate to shaft size required. |
 |
 |
O-Ring Mounted Stationaries. Inboard pinned-seat, monolithic stainless steel. Where XX is stated in the code, apply 22, 30 or 35 as appropriate to shaft size required. |
 |
 |
O-Ring Mounted Stationaries. Outboard seat, monolithic stainless steel. Where XX is stated in the code, apply 22, 30 or 35 as appropriate to shaft size required. |
 |
 |
Central Gasket Seat in Stainless Steel |
 |
 |
Centre seat with lapped faces, monolithic stainless steel |
 |
 |
Centre collet, to accept inboard and outboard seats. |
 |
 |
Outer collet, with internal carbon bush and external gland plate. |
 |
 |
O-Ring Mounted Stationaries. Inboard double O-Ring seal, monolithic stainless steel, 30mm. |
 |
 |
Central Gasket Seat in Stainless Steel. |
 |
 |
Outer collet, with internal carbon bush. |
 |
 |
Outer collet, with internal carbon bush |
 |
 |
Outer collet, with internal carbon bush |
 |
 |
Collet for single seal arrangement. |
 |
 |
Outer collet, with internal carbon bush and reduced ID dimension at internal flush port. |
 |
 |
Outer collet, with internal carbon bush. |
 |
 |
Outer collet, without internal carbon bush. |
 |
 |
Type 93B 22mm complete seal, designed to suit pump model ME155AE, GM1, GM1A, GM2 and GM2A. |
 |
 |
Type 93 22mm complete seal, designed to suit pump models MR166A, MR166B and MR166E. |
 |
 |
Type 92D 32mm complete double seal also available. |
 |
 |
Type 92 27mm complete seal, designed to suit pump models MR185A to MR200A. |
 |
 |
Type 91B 22mm complete seal, designed to suit pump models FM0, FM0S, FM1A, FM1AE, FM2A, FM3A and FM4A. |
 |
 |
Type 91 22mm complete seal, designed to suit pump models CM1A, CM1B, CM1C, CM1D, EM1C and EM1D. |
 |
 |
Vulcan can now offer replacement seals for the common models of Waukesha® Universal-series pumps. These seals comprise complete seals with rotary and inner and outer static faces, O-Rings and wave-springs as required. The Vulcan Type 87 is designed for the Universal I®-series of pumps, Type 88 is designed for Universal II®-series of pumps. Rotary with inner face is Type 87 or 88. Rotary with inner and outer statics is Type 87A or 88A, The profile of the reverse of the rotary face can be flat or sloped depending on shaft size.
|
 |
 |
Vulcan produce a simple, 1.0 shaft size rubber encased single-spring seal for use in several common food and dairy equipment applications. |
 |
 |
A unique design of multi-spring seal, where the sprung component behaves as the stationary. Suits all Inoxpa Prolac® applications where the single, uncooled mechanical seal is required. This seal is also utilised as the internal seal in double, cooled seal arrangements. |
 |
 |
Wave-spring seal available in two sizes, 48mm for APV® ZMS-5 and 54mm for APV® ZMS-6 pumps. Rotary unit has a carbon inserted face, with a monolithic stainless pinned-seat. Inserted carbide faces are also available. |
 |
 |
Vulcan manufacture and stock a range of complete wave-spring seal kits to suit the common sizes of Howard® and Crepaco® Cleanline (CL) pumps fitted with the R900® seal. Available with carbon or silicon carbide rotary faces running with silicon carbide boot-mounted seats. Kits include rotary face with O-ring and wave spring, and stationary ring fitted with boot. |
 |
 |
Vulcan manufacture direct replacement rotary parts for the Common models of Tri-Clover® Tri-Flo® pumps. The Vulcan Type 293 is an O-Ring, external mounted, hydraulically-balanced seal to replace the Tri-Clover® Type-D seal. Clamped seats with PTFE gaskets are also available to combine with the Type 293 rotary to replace the "Type-DG" seal, details available on request. Rotary faces are carbon as standard, with silicon carbide available to order. O-Ring material is normally E.P. or Viton®. |
 |
 |
Bearing face kits, for 1.1/8 shaft size, suitable for APV, Osborne Craig® mixers. The bearing seat is monolithic carbon, with the bearing being monolithic ceramic. |
 |
 |
Vulcan Type 29, suitable for APV® ZMA, ZMB, ZMD, ZMS, ZMH & ZMK Rosita® and Pasilac® pumps. Available with carbon rotary face vs. Stainless boot mounted seat as standard, or with hard silicon carbide faces, in all standard elastomers |
 |
 |
Vulcan have been successfully supplying the dairy and beverage industries with seals to suit APV Puma® pumps for over 15 years. Vulcan produce and stock all the seals and associated components commonly used on the 1.000" and 1.500" shaft Puma® pumps |
 |
 |
Vulcan produce a special Type 19 seal to suit Afla Laval ALC® series pumps, motor sizes from 1.5kW to 22kW. Available from stock with silicon carbide vs. carbon seat as standard, in all common elastomers. |
 |
 |
Vulcan offer the Type 1683 range of seals to suit the Inoxpa® SLR pump, utilising a stainless-steel wave spring rotary with a unique, double O-Ring mounted carbon stationary. The Type 1683 seal is available in four shaft sizes to suit the common SLR pumps. |
 |
 |
Vulcan manufacture and stock a range of complete wave-spring seals to suit the common sizes of Howard® and Crepaco® Cleanline (CL) pumps. Available with inserted carbon faced rotaries running with monolithic stainless steel pinned O-ring mounted seats. |
 |
 |
Vulcan manufacture and stock a range of complete wave-spring seal kits to suit the common sizes of Johnson® OL pumps. Available with inserted carbon or silicon carbide faces running with monolithic stainless steel or inserted silicon carbide stationary faces. Kits include rotary face with O-ring and wave spring, and stationary ring with O-ring. |
 |
 |
Vulcan Type 1644 rubber-encased multi-spring seal, for use in the food, beverage and dairy industries applications. Available with Ni-Resist seal face and carbon seat-ring, Nitrile elastomers, other material combinations available to special order. |
 |
 |
Vulcan manufacture and stock replacement face kits for APV W+® pumps, available in carbon vs silicon carbide, or silicon carbide vs silicon carbide, with E.P., Nitrile or Viton® O-Rings. The kits include rotary and stationary faces, with two O-Rings to suit, and a replacement face pin. |
 |
 |
The APV W® and APV W+® pumps have been introduced to replace the APV Puma® pumps. Vulcan manufacture and stock a complete range of mechanical seals designed to suit APV W® and APV W+® pumps, in single and double configuration. |
 |
 |
2.000" Outer shaft rotary head, with inserted tungsten carbide face. |
 |
 |
30mm Inboard encased rotary, with carbon face. |
 |
 |
Replacement carbon bush for 3501/7 collet. |
 |
 |
Replacement carbon bush for 3Replacement carbon bush for 3001/6 collet.001/6 collet. |
 |
 |
22mm Outboard encased rotary, with carbon face and garter spring. |
 |
 |
Replacement carbon bush for 2201/51 collet. |
 |
 |
22mm Outboard encased rotary, with carbon face. |
 |
 |
Central gasket seat in carbon. |
 |
 |
Replacement carbon bush for 2201/51 collet. |
 |
 |
Replacement carbon bush for 2201/5 collet. |
 |
 |
Replacement carbon bush for 2201/8 collet. |
 |
 |
2.000 Outer shaft collet, with chrome dioxide coated running face. |
 |
 |
2.000" Outer shaft collet, with chrome dioxide coated running face. |
 |
 |
1.1/2" Inner shaft bush, with chrome dioxide coated running face. |
